Discovery I (LJ) V8-4.0L (1996)
Timing Cover: Service and Repair
Timing Cover
REMOVAL
NOTE: Timing cover, oil pump and oil pressure relief valve are only supplied as an assembly.
1. Using assistance, restrain flywheel and remove crankshaft pulley bolt and collect spacer washer.
2. Remove crankshaft pulley.
3. Remove oil pan.
4. Remove nut and washers securing oil pick-up pipe to stud.
5. Remove 2 bolts securing oil pick-up pipe to oil pump cover, withdraw pipe from cover; remove and discard O-ring.
6. Remove oil pick-up pipe, recover spacer from stud.
7. Remove bolt securing camshaft sensor to timing cover, withdraw sensor; remove and discard O-ring.
8. Release harness connector from mounting bracket.