Discovery I (LJ) V8-4.0L (1996)
3.
Torque the bolts to 15 Nm (11 lb.ft). (See illustration above)
Reposition oil cooler pipes.
1.
Loosen the transmission oil cooler pipe fittings at the transmission.
2.
Reposition the pipes as necessary to give the required minimum clearance of 10 mm (0.40 in) between the left HO2S and the oil cooler pipes.
3.
Torque the oil cooler pipe fittings to 30 Nm (22 lb.ft). (See illustration above).
WARRANTY:
Normal warranty policy and procedures apply
Heat shield
Oil cooler
COMP.CODE:
3B5A