landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

ECM Connectors - Water Contamination|Page 6927 > < MIL ON DTC's P0130, P0150 Set|Page 6922
Page 1
background image

Engine Control Module: All Technical Service Bulletins
ECM Connectors - Water Contamination

No: 19/10/97/NAS

Ref: WSM Section 19

* Issue: 2 *

Date: 12/05/97

Revisions are noted by asterisks.

PRIDE V

2-11

GEMS ECM Water Degradation

AFFECTED VEHICLE RANGE:
DISCOVERY (LJ)

* ALL GEMS EQUIPPED *

SITUATION:
WATER LEAKS INTO GEMS ECM CONNECTORS

In some cases it has been found that water can leak into the GEMS control unit connectors and cause corrosion. Driving off-road is the primary cause of
the water ingress. This corrosion can cause a number of driveability symptoms, which in turn can cause customer concerns.

RESOLUTION:
IMPROVE WATER LEAK PROTECTION

Whenever investigating a driveability problem, the ECM connectors should be examined for corrosion and water intrusion. Use the following procedures
to reduce the chance of corrosion forming in the three ECM connectors and to improve protection of the GEMS ECM.

NOTE:

The repairs outlined in this TIB are to be performed to resolve customer complaint of the symptoms described.

PARTS INFORMATION:

LRN2274-006

Grommet

* Qty 1 *

LRN236X1AH1

Plastic Plug

* Qty 4 *

AMR5619

Grommet

* Qty 1 *

YOO3100PMA

"Fir Tree" Fastener

* Qty 2 *

MUC4177

Seal

* Qty 1 *

WARRANTY CLAIMS:

18.20.89/27

Time 0.40 hrs.
Inspect GEMS ECM, and seal against water leaks.

COMP CODE:

7G1H

Normal warranty policy and procedures apply

REPAIR PROCEDURE:

ECM Connectors - Water Contamination|Page 6927 > < MIL ON DTC's P0130, P0150 Set|Page 6922