landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

CKP Sensor/Heat Shield - Revised Tightening Bolts|Page 7141 > < Engine - Misfire Diagnosis|Page 7136
Page 1
background image

Crankshaft Position Sensor: All Technical Service Bulletins
CKP Sensor/Heat Shield - Revised Tightening Bolts

19/O5/96/US

12/31/96

SUBJECT
PRIDE - Securing Crankshaft Sensor & Heat Shield

MODEL
Discovery
Discovery

AFFECTED VEHICLES
LP
LH
LJ Up to VA5341O8
LD Up to VA703241

DETAIL

Improvements have been made to the retention of the Crankshaft position (CKP) sensor and the CKP sensor heat shield on vehicles within the above
VIN ranges. New bolts have been introduced into production which hold the CKP sensor and a new heat shield in position more securely.

The diagnostic steps and repair procedures detailed on the following pages were developed as an element of the Land Rover Way OPERATION PRIDE.
This TIB provides a library location for PRIDE informationn within the Land Rover North America technical literature system.

ACTION REQUIRED
If the crankshaft position sensor is found to be loose or if it is replaced for any reason, the improved bolts and a new improved heat shield should be
installed.

PARTS INFORMATION
ERR 6928 Heat shield
Automatic: ERR 6929 Bolt M5X50 

ERR 6930 Bolt M5X30

Manual:

ERR 6931 Bolt M5X40 
ERR 6932 Bolt M5X20

WARRANTY
Normal warranty procedures and policies apply.

COMP. CODE 
7A5G

SRO
18.30.12 Time: 0.4 hour 
Crank shaft position sensor refit/renew

CKP Sensor/Heat Shield - Revised Tightening Bolts|Page 7141 > < Engine - Misfire Diagnosis|Page 7136