Discovery I (LJ) V8-4.0L (1996)
/v8-4.0l/Page-1262004.png)
Do not use thread sealant on threads of oil pressure switch.
5.
Install new oil pressure switch with new copper crush washer and torque to 20 to 25 Nm. (15 to 19 lbf. ft.).
6.
Apply electrical connector grease into the female electrical connector and install on switch.
7.
Top off engine oil if necessary.
CAMPAIGN ADMINISTRATION
1.
Apply a completed campaign label (LRN0001LABEL) to the front cross member under the hood to identify that Service Action H483 has been
performed.
