Discovery I (LJ) V8-4.0L (1996)
Evaporative Emission Control Canister: Service and Repair
Advanced EVAP System
EVAP CANISTER - ADVANCED EVAPS
Remove
1. Disconnect battery earth lead.
2. Release clip securing vent solenoid hose to canister and disconnect hose.
3. Release vent and purge line quickfit connections from canister.
4. Remove nut and bolt securing canister to mounting bracket, collect fixture clamp.
5. Remove canister.
Refit
6. Fit canister to mounting bracket.
7. Position fixture clamp and secure canister to mounting bracket with nut and bolt.
8. Connect vent and purge line quickfit connections to canister.
9. Connect vent solenoid hose to canister and secure with clip.
10. Connect battery earth lead.