Discovery I (LJ) V8-4.0L (1996)
Seat Latch: Service and Repair
Seat Locking Mechanism - Split Rear
Seat Locking Mechanism - Split Rear
Remove
1. Remove the front body side trim casing.
2. Remove the three screws securing the latch to the tower, noting that access to the single screw is gained through the hole in the front of the tower.
3. Retrieve the latch from the opening at the rear of the tower. If necessary retrieve the single screw.
4. The operating rod can be removed from the latch by releasing it at the plastic clip.
Refit
5. Reverse removal procedure. Setting the release button to achieve a gap of 5 - 8 mm.