Discovery I (LJ) V8-4.0L (1996)
/v8-4.0l/Page-1391003.png)
40. Connect multiplugs to TP sensor and IAC motor.
41. Connect breather hose to plenum chamber.
42. Fit kick down cable to abutment bracket and fit locknut.
43. Connect throttle cable to abutment bracket.
44. Connect vacuum hose to actuator.
45. Align throttle cable to lever. Fit clevis pin. Secure clevis pin with split pin.
46. Align kick down cable to lever.
47. Fit clevis pin and secure clip.
48. Connect intake hose and secure with clip.
49. Reconnect battery negative lead.
50. Top up cooling system.
