Discovery I (LJ) V8-4.0L (1996)
Blower Motor Switch: Service and Repair
Remove
1. Pull 3 knobs from rotary controls.
2. Pull knob from blower switch.
3. Remove 2 screws retaining graphics panel.
4. Remove graphics plate.
5. Remove capless bulb.
6. Remove 4 screws retaining switch.
7. Remove switch panel. Use plastic tube to assist removal.
Blower switch
8. Pull blower switch from rear of panel.
9. Disconnect multiplug and remove blower switch.
Refit
10. Reverse removal procedure.