landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Recall - Driveshaft Nut/Bolt Replacement|Page 9426 > < Driveline - Vibration/Noise at Low or High Speeds|Page 9421
Page 1
background image

Drive/Propeller Shaft: All Technical Service Bulletins
Recall - Driveshaft Nut/Bolt Replacement

31/O5/95

D/C 867

SUBJECT
Driveshaft Nuts and Bolts

MODEL
Range Rover Classic
Discovery
Defender 90

AFFECTED VEHICLES
LP
LH 658867 to 659641
LJ 130785 to 135538
LD 957390 to 959067

DETAIL

A number of vehicles have had incorrectly sized nuts fitted to secure the driveshaft to the differential pinion drive flange. The 155 vehicles to this
condition are individually identified by dealer number and VIN on the list supplied with Recall Service Bulletin R95-001. All of these vehicles must
have the nuts and bolts changed.

The following vehicle information is applicable.

^

Range Rover Classic - (differential end) front driveshaft nuts and bolts only.

^

Discovery - (differential end) front driveshaft nuts and bolts only.

^

Defender 90 - (differential end) front and rear driveshaft nuts and bolts.

PARTS INFORMATION

Range Rover Classic and Discovery

NZ 606041L Front driveshaft drive flange nuts - 4 req.
509045P Front driveshaft drive flange bolts - 4 req.

Defender 90

NZ 606041L Front and rear driveshaft drive flange nuts - 8 req.
509045P Front and rear driveshaft drive flange bolts - 8 req

PROCEDURE

All vehicles:

1)

Position vehicle on a lift.

Recall - Driveshaft Nut/Bolt Replacement|Page 9426 > < Driveline - Vibration/Noise at Low or High Speeds|Page 9421