Discovery I (LJ) V8-4.0L (1996)
Axle Shaft: Specifications
Front
Tightening
TIGHTENING SPECIFICATIONS
Stub Axle To Swivel Pin Housing (*) ............................................................................................................................................................... 65 Nm
NOTE: (*) These bolts to be coated with Loctite 270 prior to assembly.
Measurement
MEASUREMENT SPECIFICATIONS
Front Hub End Float ...................................................................................................................................................................................... 0.01 mm
Drive Shaft End Play .......................................................................................................................................................................... 0.08 to 0.25 mm
Swivel Pin Bearing Preload (Resistance To Turn) ................................................................................................................................... 1.16-1.46 kg