Discovery I (LJ) V8-4.0L (1996)
12.
Remove mud shield, stub axle, and gasket (Figure 2).
13.
Remove bearing and oil seal using tool # LRT-37-004 and slide hammer # LRT-99-004. Make sure that the lip of the tool engages behind bearing
to pull it out (Figure 3).
14.
Use same procedure to remove oil seal.
INSTALLATION
1.
Lubricate seal and lip with gear oil.
NOTE:
Use the side of the tool marked "Front".
2.*
With the metal ring facing the tool press in the new seal with tool # LRT-54-013A (Figure 4).*