Discovery I (LJ) V8-4.0L (1996)
/v8-4.0l/Page-1632004.png)
15.
Install brake caliper. Tighten bolts to 82 Nm. (61 lbf. ft.), and secure brake hose to axle housing.
17.
Push ABS sensor in until it touches sensor ring. Rotate hub to set sensor.
18.
Install road wheel and tighten lug nuts to 126 Nm. (93 lbf. ft.).
19.
Check axle fluid level and top up as necessary.
20.
Remove axle stands and lower vehicle.
WARRANTY:
Normal warranty policy and procedures apply
COMP.CODE:
SRO:
64.16.22 - Time 0.85 hr. each
Replace rear stub axle seal
