Discovery I (LJ) V8-4.0L (1996)
11.
Fit second hub nut and torque to 50 Nm (37 lbf. ft.).
12.
Lock both inner and outer nuts with locking tab washer.
13.
Bend over lock washer to secure adjusting nut and lock nut.
14.
Using new gasket install axle shaft into hub, and secure with five bolts. Tighten to 65 Nm (48 lbf. ft.).
15.
Install brake caliper. Tighten bolts to 82 Nm (61 lbf. ft.), and secure brake hose to axle housing.
16.
Push ABS sensor in until it touches sensor ring. Rotate hub to set sensor.
17.
Install road wheel and tighten lug nuts to 126 Nm (93 lbf. ft.).
18.
Check axle fluid level and top up as necessary.
19.
Remove axle stands and lower vehicle.