Discovery I (LJ) V8-4.0L (1996)
/v8-4.0l/Page-1743003.png)
16.
Apply final torque of 45 Nm (33 lbf.ft.) to the main bearing cap side bolts.
17.
Refer to Workshop Manual section 12.21.20 and install new crankshaft rear oil seal to crankshaft.
18.
Inspect camshaft oil gallery plugs and the camshaft bore cup plug for leakage.
19.
If leakage is determined, refer to Technical Information Bulletin 12/01/02/NAS and seal.
20.
Install starter motor and sump.
21.
Install torque converter drive plate.
