Discovery I (LJ) V8-4.0L (1996)
Quarter Window Glass: Service and Repair
Body Side Window Hinges
Body Side Window Hinges
Service Repair No - 76.81.47
Remove
1. Remove the window.
2. Remove the passenger grab handle.
3. Detach the front seat belt top mounting from the door post.
4. Ease the trim panel away from the door post to gain access to the window hinges.
5. Remove the screws securing the window hinges, taking care not to lose the the packing washers where fitted. Note the thickness and location of
any packing washers fitted.
Refit
6. Fit the hinges with packing washers fitted to the locations and thickness noted during removal. Do not fully tighten the screws at this stage.
7. Refit the glass to the hinges.
8. Locate the window catch trim and secure the catch to the body.
9. Close the window and secure with the catch.
10. Check the alignment and squareness of the glass, adjust as necessary by adding or deleting washers and using the elongated slots in the hinges for
adjustment, finally tighten the screws.
11. Reposition the trim panel and refit the hinge finishers.
12. Refit the top seat belt bracket and the grab handle.