Discovery I (LJ) V8-4.0L (1996)
Wiper Arm: Service and Repair
Wiper Arm - Rear Window
Wiper Arm - Rear Window
Service Repair No - 84.35.01
Remove
1. Remove plastic nut cover and wiper arm securing nut.
2. Withdraw wiper arm and grommet from splined boss.
Refit
3. Allow wiper motor to move to 'park' position.
4. Fit spacer and wiper arm to splined boss so that the wiper blade is clear of rear window surround.
5. Fit and tighten securing nut.
6. Push plastic nut cover into position.
7. Check operation of wiper.