Discovery I (LJ) V8-4.0L (1996)
Wiper Motor: Service and Repair
Rear Wiper Motor
Rear Window Wiper Motor
Service Repair No - 84.35.12
Remove
1. Disconnect battery negative lead.
2. Remove rear door trim panel.
3. Remove spare wheel.
4. Remove wiper arm and grommet.
5. Remove nut, plain washer and seal from drive spindle.
6. From inside the door, disconnect wiper motor leads from door harness at multi-plug.
7. Remove bolts securing wiper motor mounting bracket and negative lead to inner door panel.
8. Withdraw motor spindle from outer door panel and maneuver wiper motor from door casing complete with the spindle spacer.