Discovery II (LT) V8-4.0L (2002)
/v8-4.0l/Page-1464002.png)
9. Remove 3 screws securing power amplifier to mounting bracket and remove power amplifier.
Refit
1. Fit power amplifier to mounting bracket and secure with screws.
2. Position power amplifier and mounting bracket to body and connect power amplifier multiplug. If applicable, also connect EAT ECU multiplug.
3. Fit bracket to body mountings and secure with nuts.
4. Position lower trim casing to seat and secure with fixings.
5. Connect battery earth lead.
6. Fit battery cover and secure with fixings.
