Discovery II (LT) V8-4.0L (2002)
b)
Use a ballpoint pen and neatly write in the bare aluminum areas of the label the following information:
^
Service Action campaign code "HU03"
^
Your retailer code
^
Date of repair
CAUTION:
Do not touch the exposed label adhesive with your fingers. The bond will be diminished if contaminated prior to application.
2.
Clean all grease and dirt from an area of the radiator support member.
3.
Peel the completed campaign label from the backing paper and position it on the cleaned area of the cross member.
4.
Roll the label with the special roller tool to ensure that the adhesive makes continuous contact with the cross member surface.