Discovery II (LT) V8-4.0L (2002)
/v8-4.0l/Page-1510002.png)
4. Release 2 clips securing bumper ends to mounting brackets.
CAUTION: Loosen bolts securing bumper end mounting brackets to chassis frame to avoid damage to sealing rubber during bumper
remove and refit.
5. Remove 2 bumper bolt access plugs from bumper valance. Remove bolts.
6. With assistance remove bumper assembly.
Do not carry out further dismantling it component is removed for access only.
7. Remove 8 studs and 6 clips securing extensions spoiler. Remove extension.
