Discovery II (LT) V8-4.0L (2002)
Rear Door Exterior Handle: Service and Repair
Rear Door
Remove
1. Remove rear door trim casing.
2. Carefully release water shedder from door.
3. Release control rod from latch.
4. Remove Torx bolt securing exterior handle to door.
5. Remove exterior handle.
6. Remove control rod from exterior handle.
Refit
1. Fit control rod to exterior handle.
2. Position exterior handle and secure to door with Torx bolt.
3. Connect control rod to latch.
4. Fit water shedder to door.
5. Fit rear door trim casing.