Discovery II (LT) V8-4.0L (2002)
Rear Fender Liner: Service and Repair
76.10.49 Liner - Wheel Arch - Rear
Remove
1. Remove 2 trim clips securing rear mud flap to bumper side section.
2. Remove 2 screws securing bumper side section to body.
3. Remove bumper side section.
4. Drill out 2 rivets securing mud flap to wheel arch liner.
5. Remove mud flap.
6. Drill out rivet securing wheel arch liner to support bracket.
7. Drill out 3 rivets securing wheel arch liner to body.
8. Remove wheel arch liner.
Refit
1. Position wheel arch liner to vehicle and secure to body with rivets.
2. Fit rivet securing wheel arch liner to support bracket.