Discovery II (LT) V8-4.0L (2002)
Glove Compartment: Service and Repair
Glove Box Release Cable
Glove Box Release Cable
Service Repair No - 76.52.14
NOTE: Release cables are supplied preset and do not normally require adjustment.
Remove
1. Open glove box. Remove 5 screws securing glove box liner to fascia.
2. Lower glove box liner. Release 2 clips to disengage cable latch from location.
3. Remove finisher from lock.
4. Remove 2 screws securing lock and withdraw cable assembly from fascia.
5. Pry cover from lock button.
6. Insert key into lock, turn key through 45 degrees, remove barrel.
Refit