Discovery II (LT) V8-4.0L (2002)
/v8-4.0l/Page-1636002.png)
9. Position seat upside down on table.
10. Release clip securing lower edge of squab cover to seat frame.
11. Remove 2 clips securing either end of cover to squab frame.
12. Position seat in upright position.
13. Raise headrest to maximum height.
14. Turn both guides through 90 degrees.
15. Remove headrest from seat.
16. Remove screws securing grab handles to seat frame and remove grab handles.
17. Release clip securing front of cover to squab frame,
18. Release hooks from squab frame.
