Discovery II (LT) V8-4.0L (2002)
Refit
1. Position cushion to pad and secure with hog rings.
2. Push retaining bars through pad and fit cover to sides of pad.
3. Position cushion assembly to frame and secure side clips.
4. Fit spring clips and secure to hooks at rear of frame.
5. Position under tray and secure with studs.
6. Fit rear seat.
Cover - Squab - Front Seat
Cover - squab - front seat
Service repair No - 78.90.08/81
Remove
1. Remove front seat.
2. Place seat on a suitable work bench.
3. Tighten arm rest adjuster fully clockwise and remove screw cover.
4. Remove screw securing arm rest to seat and remove arm rest.
5. Remove 2 screws securing outer edge trim casing to seat frame.
6. Remove trim casing.
7. Release inner edge of trim casing from seat frame.
8. Remove trim casing.