Discovery II (LT) V8-4.0L (2002)
Parking Brake Cable: Service and Repair
Cable - Handbrake
Sevice Repair No - 70.35.25
Remove
1. Remove center console.
2. Remove clip and clevis pin securing cable to hand brake lever.
3. Remove brake shoes from hand brake assembly.
4. From below the vehicle, pull hand brake cable through transmission tunnel.
5. Release hand brake cable from backplate.
Refit
1. Fit and secure hand brake cable to backplate.
2. Position hand brake cable through transmission tunnel.
3. Fit brake shoes to hand brake assembly.
4. Align cable to hand brake lever and secure with clip and clevis pin.
5. Fit center console.
6. Adjust hand brake.