Discovery II (LT) V8-4.0L (2002)
/v8-4.0l/Page-1680001.png)
Cruise Control Servo Cable: Adjustments
Cruise Control Cable - Adjust
1. Ensure that the throttle cable is correctly adjusted.
2. Loosen outer cable locknuts.
3. Adjust the rear locknut to obtain a 0.5 to 1.5 mm (0.019 to 0.060 in) gap, dimension 'A', between the cruise control cable lever and the throttle
cable driven lever.
4. Tighten cable front locknut.
