Discovery II (LT) V8-4.0L (2002)
/v8-4.0l/Page-423002.png)
4. Collect spacer.
5. Remove and discard 'O' ring.
Reassembly
1. Clean oil pick up strainer and 'O' ring recess.
2. Lubricate new O-ring with clean engine oil and fit to recess.
3. Locate spacer on stud.
4. Position oil pick up strainer, fit bolts and tighten to 10 Nm (7 ft. lbs.). Fit nut and tighten to 22 Nm (16 ft. lbs.).
5. Fit new sump gasket.
