Discovery II (LT) V8-4.0L (2002)
/v8-4.0l/Page-448004.png)
20. Using new gaskets, fit exhaust manifold to cylinder head. Fit bolts and using sequence shown, tighten initially to 15 Nm (11 ft. lbs.), then finally
tighten to 36 Nm (28 ft. lbs.).
21. RH drive models: Fit brake servo heat shield.
22. Position engine earth lead, fit bolt and tighten to 22 Nm (16 ft. lbs.).
23. Fit inlet manifold gasket.
