Discovery II (LT) V8-4.0L (2002)
Exhaust Pipe: Service and Repair
Tailpipe
Tail Pipe
Service Repair No - 30.10.22
Remove
1. Raise vehicle on ramp.
2. Remove 3 nuts securing intermediate pipe/ silencer to tail pipe.
3. Release and remove tail pipe from mounting.
4. Collect intermediate pipe/silencer to tail pipe gasket.
Refit
1. Clean silencer and tail pipe mating faces.
2. Position tail pipe and secure on mounting.
3. Using a new gasket, align tail pipe to intermediate pipe/silencer.
4. Fit nuts to intermediate pipe/silencer and tighten to 25 Nm (18 ft. lbs.).