Discovery II (LT) V8-4.0L (2002)
/v8-4.0l/Page-1397002.png)
Refit
1. Lubricate new 'O' rings with clean refrigerant oil and fit to TXV pipes.
2. Position TXV, align pipes and tighten unions.
3. Connect sensor and secure with clip.
4. Fit insulation to TXV valve and sensor.
5. Position seat support bracket, fit bolts and tighten to 24 Nm (18 ft. lbs.).
6. Repressurise air conditioning system.
7. Fit rear lower trim casing.
