Discovery II (LT) V8-4.0L (2002)
/v8-4.0l/Page-790002.png)
LH Bank (cylinders 1, 3, 5, 7)
^
Cylinder 1 - pin 6 of connector C0638 of the ECM multiplug.
^
Cylinder 3 - pin 2 of connector C0638 of the ECM multiplug.
^
Cylinder 5 - pin 8 of connector C0638 of the ECM multiplug.
^
Cylinder 7 - pin 7 of connector C0638 of the ECM multiplug.
RH Bank (cylinders 2, 4, 6, 8)
^
Cylinder 2 - pin 2 of connector C0638 of the ECM multiplug.
^
Cylinder 4 - pin 7 of connector C0638 of the ECM multiplug.
^
Cylinder 6 - pin 6 of connector C0638 of the ECM multiplug.
^
Cylinder 8 - pin 8 of connector C0638 of the ECM multiplug.
The ignition coil can fail the following ways or supply incorrect signal:
^
Coil open circuit.
^
Short circuit to vehicle supply.
^
Short circuit to vehicle earth.
^
Faulty component.
In the event of ignition coil failure any of the following symptoms may be observed:
^
Engine misfire on specific cylinders.
^
Engine will not start.
