Discovery II (LT) V8-4.0L (2002)
/v8-4.0l/Page-1435002.png)
8. Remove seat belt.
Refit
1. Fit seat belt reel to body and tighten bolt to 32 Nm (24 ft. lbs.).
2. Fit seat belt upper anchorage to body and tighten bolt to 50 Nm (37 ft. lbs.).
3. Fit cover to upper anchorage bolt,
4. Fit seat belt lower anchorage to body and tighten bolt to 32 Nm (24 ft. lbs.).
5. Fit cap to lower anchorage bolt.
6. Fit loadspace side trim casing.
7. Fit 'D' post trim casing.
