Discovery II (LT) V8-4.0L (2002)
8. Clean PAS pump pulley mating faces.
9. Position PAS pump pulley, fit bolts and tighten to 22 Nm (16 ft. lbs.).
10. Models with ACE: Clean ACE pump dowels and dowel holes. Position ACE pump, fit bolts and tighten to 25 Nm (18 ft. lbs.).
11. Models with A/C: Clean A/C compressor dowels and dowel holes. Position A/C compressor, fit bolts and tighten to 22 Nm (16 ft. lbs.).
12. Position air intake hose and secure with clips.
13. Secure harness to air intake hose with new cable tie.
14. Fit auxiliary drive belt.
15. Bleed PAS system.