Discovery II (LT) V8-4.0L (2002)
1. Clean bush locations in Panhard rod.
2. Use LRT-60-013 fitted with LRT-60-013/1 and LRT-60-103/2 to press new bushes into Panhard rod. Ensure pressure is applied to the outer edge
of the bush, not the rubber inner.
3. Position Panhard rod to axle and chassis.
4. Fit bolts securing Panhard rod but do not tighten at this stage.
5. Remove stand(s) and lower vehicle.
6. Tighten bolts securing Panhard rod to 230 Nm (170 ft. lbs.).