Discovery II (LT) V8-4.0L (2002)
Radius Arm Bushing: Service and Repair
Front Suspension
Bushes- Radius Arm
Remove
1. Raise front of vehicle.
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
2. Remove road wheel.
3. Remove nut securing track rod to steering knuckle. Use LRT-57-036 to break taper, then release track rod and position aside.
4. Remove nut and bolt securing radius arm to chassis.
5. Remove nuts securing radius arm to axle. Remove rear bolt and lower the radius arm. Remove front bolt and remove radius arm from vehicle.