Discovery II (LT) V8-4.0L (2002)
4. Drift out and discard selector quadrant roll pin.
Remove selector shaft.
5. Remove selector quadrant and connecting rod.
6. Remove oil seal taking care not to damage seal housing.
Refit
1. Clean shaft and seal housing.
2. Using a suitable adapter, fit new seal.
3. Position selector quadrant and connecting rod.
4. Position selector shaft and secure to quadrant using new roll pin.
5. Fit valve body assembly.
Torque Converter Seal
Oil seal - Converter
Service Repair No - 44.17.11
Remove
1. Remove automatic gearbox.
2. Position container beneath converter housing to catch oil spillage.
3. Remove torque converter retaining strap.
4. Remove torque converter.
5. Remove seal from converter housing taking care not to damage seal housing.
Refit
1. Clean seal location and running surface with a lint free cloth. Wipe oil spillage from converter housing.
2. Lubricate new seal with transmission oil.