Discovery II (LT) V8-4.0L (2002)
Shifter A/T: Technical Service Bulletins
A/T - Shift Lever Selector Knob Installation
TA03 4401
April 23, 2003
ATTENTION:
Service Manager
Service Advisor
Technician
Discovery Series II: Correct Installation of AT Selector Knob
SITUATION:
When fitting the automatic transmission selector knob after a service repair, the park release button rod can be damaged. The damage can result from
incorrectly positioning the gear selector when the selector knob is fitted. (Figure 1)
RESOLUTION:
When fitting the automatic transmission selector knob, the selector MUST be in the PARK (P) position (Figure 2) to ensure that:
^
The latching rod is not damaged
^
The latching rod does not cause damage to the raised segments of the selector detents.