Discovery II (LT) V8-4.0L (2002)
Shifter M/T: Service and Repair
Lever - Gear Change
Lever - Gear Change
Service Repair No - 37.16.04
Disassembly
1. Remove gear selector housing.
2. Restrain right hand bias spring using a suitable pair of grips.
3. Remove 2 bolts securing right hand side of bias spring adjustment plate.
4. Repeat operations for left hand bias spring.
5. Remove bias springs and adjustment plate.
6. Remove lower gear lever.
7. Remove and discard Railko bush.
8. Remove and discard oil seal from housing.
Reassembly
1. Clean components.
2. Apply multi-purpose grease to ball and cross pins.
3. Apply multi-purpose to new Railko bush and fit to housing ensuring that slots are correctly aligned.
4. Lubricate a new seal with gearbox oil and fit, lip side towards housing using a suitable mandrel.