Discovery II (LT) V8-4.6L (2003)
Trim Panel: Service and Repair
Panel - Auxiliary Switch
Panel - Auxiliary Switch
Service Repair No - 76.46.38
Remove
1. Carefully remove electric exterior mirror switch from auxiliary switch panel and disconnect multiplug.
2. Models with headlamp levelling: Release knob and remove nut securing headlamp levelling switch to auxiliary switch panel.
3. Release 2 fasteners and open fascia access panel.
4. Models with headlamp levelling: Remove headlamp levelling switch from auxiliary switch panel and disconnect multiplug.
5. Models with A/C: Remove 2 screws securing in-car temperature sensor to auxiliary switch panel.
6. Models with A/C: Disconnect multiplug from in-car temperature sensor and remove from auxiliary switch panel.
7. Release 2 clips securing auxiliary switch panel to fascia and remove panel.
Refit
1. Position auxiliary switch panel to fascia and clip into position.
2. Models with A/C: Connect multiplug to in-car temperature sensor.
3. Models with A/C: Position in-car temperature sensor to auxiliary switch panel and secure with screws.
4. Models with headlamp levelling: Position headlamp levelling switch to auxiliary switch panel and secure with nut.
5. Models with headlamp levelling: Replace cap and connect multiplug to headlamp levelling switch.
6. Connect multiplug to exterior mirror switch and fit switch to auxiliary switch panel.