Discovery II (LT) V8-4.6L (2003)
Power Seat Motor: Service and Repair
Motor - Tilt - Front Seat
78.70.29 Motor - Tilt - Front Seat
Remove
1. Remove front seat.
2. Disconnect multiplug from tilt motor.
3. Remove 2 retainers and 'C' clip from roll pins securing tilt motor.
4. Using a suitable drift remove roll pins securing tilt motor and operating lever to seat frame.
5. Remove tilt motor.
Refit
1. Position and align tilt motor to seat frame.
2. Fit new roll pins to secure motor and operating arm.
3. Fit new retainers and 'C' clip to roll pins.
4. Connect multiplug to tilt motor.
5. Fit front seat.