Discovery II (LT) V8-4.6L (2003)
5.
If an accessory mat is installed, perform the following check:
^
Ensure that the mat does not foul the seat latch or the seat striker.
^
Deploy the seat.
^
If the seat is still difficult (an unreasonable amount of force is required) to latch, stow the seat and remove the accessory mat.
^
Deploy the seat.
^
If acceptable seat latching effort is obtained, stow the seat and reinstall the accessory mat.
6.
If debris is observed around the floor striker, perform the following:
^
Remove two screws securing the floor finisher to the luggage floor carpet. (Arrowed in Figure 3)
^
Remove the floor finisher.
^
Clean floor finisher and the area around the seat striker.
^
Fit the floor finisher and secure with screws.
^
Operate the seat and check that the seat latches securely to the seat striker.
7.
If the seat is still difficult to latch, perform the following:
^
Remove two screws securing the floor finisher.
^
Remove the floor finisher.
^
Move the carpet aside for access.
^
Remove two bolts securing the seat striker to the body. (Arrowed in Figure 4)
^
Remove seat striker and discard washers.
^
Fit two new washers (4868L) between the seat striker and the body,
^
Secure the seat striker with the bolts.