Discovery II (LT) V8-4.6L (2003)
Engine - Coolant Temperature Sensor/Switch: Service and Repair
Sensor - Radiator Temperature
Sensor - Radiator Temperature
Service Repair No - 18.30.20
Remove
1. Disconnect battery earth lead.
2. Position container to collect coolant spillage.
3. Disconnect multiplug from sensor.
4. Remove sensor and discard sealing washer.
Refit
1. Fit new sealing washer to sensor.
2. Fit and tighten sensor.
3. Connect multiplug to sensor.
4. Refill cooling system.
5. Connect battery earth lead.