Discovery II (LT) V8-4.6L (2003)
/v8-4.6l/Page-1792001.png)
Backup Lamp Switch: Service and Repair
Switch - Reverse Light
Remove
1. Raise vehicle on ramp.
2. Disconnect reverse lamp switch multiplug.
3. Remove switch and collect sealing washer.
Refit
1. Clean switch and mating face on gearbox.
2. Using a new sealing washer, fit the reverse light switch and tighten to 24 Nm (117 ft. lbs.).
3. Connect switch multiplug.
4. Lower vehicle.
