Discovery II (LT) V8-4.6L (2003)
Idle Speed/Throttle Actuator - Electronic: Service and Repair
Valve - Idle Air Control (IACV)
Service Repair No - 19.22.54
Remove
1. Disconnect multiplug from IACV.
2. Loosen 2 clips securing air hoses and release hoses.
3. Remove 2 screws securing IACV to inlet manifold.
4. Collect clamps and remove IACV.
Refit
1. Position IACV to inlet manifold, locate clamps, fit screws and tighten to 8 Nm (6 ft. lbs.).
2. Position air hoses to IACV and secure clips.
3. Connect multiplug to IACV.