Discovery II (LT) V8-4.6L (2003)
Evaporative Emission Control Canister: Service and Repair
Canister - EVAP
Canister - EVAP
Service Repair No - 17.15.13
Remove
1. Raise vehicle on lift.
2. Remove 2 bolts securing canister bracket to chassis.
3. Remove bolt securing canister to bracket and remove bracket.
4. Release clip and disconnect air intake pipe from canister.
5. Release and remove purge and tank vent pipes from canister.
6. Remove charcoal canister.
CAUTION: Always fit plugs to open connections to prevent contamination.
Refit
1. Ensure all connections are clean.
2. Position new canister and connect purge and tank vent pipes.
3. Connect air intake pipe to canister and secure with clip.
4. Fit bracket to canister and secure with bolt.
5. Fit canister and bracket and secure with bolts.