Discovery II (LT) V8-4.6L (2003)
Damping Control Actuator: Service and Repair
Actuator - Front - ACE
Actuator - Front - ACE
Service Repair No - 60.60.40
CAUTION: The ACE hydraulic system is extremely sensitive to the ingress of dirt or debris. The smallest amount could render the system
unserviceable. It is imperative that the following precautions are taken:
^
ACE components are thoroughly cleaned externally before work commences.
^
All opened pipe and module ports are capped immediately.
^
All fluid is stored in and administered through clean containers.
Remove
1. Raise vehicle on a ramp.
2. Remove RH front road wheel.
3. Position container to collect fluid spillage.
4. Remove cap nuts securing fluid pipes to actuator. Disconnect pipes and discard sealing washers.
CAUTION: Always fit plugs to open connections to prevent contamination.
5. Remove 2 nuts securing anti-roll bar links to axle. Release links from axle.