Discovery II (LT) V8-4.6L (2003)
Axle Shaft: Service and Repair
Front Differential
Drive Shaft
Remove
1. Raise front of vehicle.
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
2. Remove road wheel.
3. Release stake from drive shaft nut.
4. With assistance, remove drive shaft nut. Discard the nut.
5. Remove front brake disc. Refer to Brakes and Traction Control.
6. Remove Allen bolt securing ABS sensor and release ABS sensor from wheel hub. Remove and discard O-ring from ABS sensor.
7. Remove 4 bolts securing wheel hub to steering knuckle.
8. Release wheel hub from steering knuckle.
9. Remove wheel hub from drive shaft.