landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Wipers/Washers - Rear Wiper Arm Broken at Pivot Pin|Page 7739 > < Switch - Wiper and Washer - Windscreen|Page 7730
Page 1
background image

Wiper Arm: All Technical Service Bulletins
Wipers/Washers - Rear Wiper Arm Broken at Pivot Pin

No: 84/02/04/NAS
Ref:
Issue: 1
Date: 17 September 2004

Rear Wiper Arm Breaking at Arm Pivot Pin

AFFECTED VEHICLE RANGE:

Discovery Series II (LT)
3A767790 to 4A860110

SITUATION:

REAR WIPER ARM BREAKS AT PIVOT PIN

A tolerance inconsistency exists between the arm pivot pin and the wiper arm head. This results in a weak point at the pivot pin which can result in a
crack in the arm under heavy loads - such as snow.

RESOLUTION:

REPLACE WIPER ARM WITH NEW SPECIFICATION ARM

A new specification wiper arm is now available from Land Rover. Upon customer complaint of the above symptoms, follow the repair procedure to
replace the wiper arm.

PARTS INFORMATION:

DKB500310

PMD Rear wiper arm

Qty 1

DDW WARRANTY CLAIMS:

DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.

Normal warranty policy and procedures apply. 
Material allowance is included in labor operation.

REPAIR PROCEDURE

REPLACE THE REAR WIPER ARM

Wipers/Washers - Rear Wiper Arm Broken at Pivot Pin|Page 7739 > < Switch - Wiper and Washer - Windscreen|Page 7730